DPLLexis Marker (2W)

Technical details

The DPLLexis Marker operates at a wavelength of 355nm in the ultraviolet spectral range and offers new opportunities for the marking of many materials. This laser is suitable especially for the precise marking of plastics and glass. The marking is produced by a very low heat. In this way, even highly sensitive products can be marked extremely gently and in a very high contrast without a thermal and mechanical stress of the material. The laser works with thermoelectric air cooling instead of high-maintenance air/water or water cooling, so that time-consuming maintenance work and expensive downtimes are avoided.The system represents a solution in accordance with laser safety class 4. For operation in accordance with laser safety class 1, ACI Laser GmbH also provides complete solutions in the form of lasers in conjunction with different manual workplaces.

Fields of application

The BusinessDiode lasers can be used either at a manual workplace or as integration components in an automated system.


The marking software MagicMark required for operation is included in the scope of delivery. This enables the marking of texts, graphics, codes such as Data Matrix or barcodes, serial numbers, logos, wraparound circumferential marking without lap marks on rotationally symmetrical work pieces. An intelligent rights management system supports the establishment of different operator groups, thus allowing customisation of the system to the user’s individual requirements. Even fully automatic operation with data exchange to different data sources is possible for automated production lines without any problems.

Please contact our distribution partner in your home country for further information.

Lasertype: Nd:YVO4
Wave length: 355 nm
Pumping principle : Longitudinal
Laser power: 2W
Pulse energy: >15 µJ
Number of adjustable pulse lengths: 10-18ns
Pulse repetition rate: 40-200 kHz
Laser class: 4
Input: max. 220 W
Labeling field size 1: 60 x 60 mm
Labeling field size 2: 110 x 110 mm
Labeling field size 3: 180×180 mm
Weight: 20 kg
Length: 740 mm
Width: 201 mm
Height: 233 mm
Connected load: 100–240 VAC / 16 A / 50-60 Hz
Interfaces: USB 2.0, SPS-Interface, Interlock PLe


Annealing marking: unsuitable
Coating ablation: good
Material ablation: good

Foaming: very good
Carbonation: very good
Engraving: unsuitable

Glass: very good
Ceramics: good
Wood, Paper, Leather: good

Product Enquiry